Well to be totally honest, I kept seeing these ugly faded plastic or rusty steel storm water grates everywhere. This made me think if only there were a way we could make these grates look good – and so the Lauxes Storm Water grate tops were born. A complete DIY option means no tradies, no labour costs, a cheap replacement option for the top tray. There is nothing like this on the market – an aesthetic, affordable and practical finish for popular storm water drainage channels.
If you already have a plastic storm water drainage channel installed it’s a simple top replacement. All you need to do is cut your new top to its desired length and replace the existing top tray with your Lauxes one! The stormwater grate is appropriate for any areas where large volumes of water need to be taken away (outdoor use).
If it’s a new installation, you will need to purchase your full stormwater grate/channel from a hardware or plumbing store. This must be 128mm internal top measurements. Follow their installation instructions, keeping in mind the straighter the installation, the better the finish (quick tip: install up against a straight edge or existing slab). Make sure you keep the existing plastic top in until completed and then finally remove the plastic top and insert your new Lauxes storm water top.
Your new Lauxes grate is a fine finished product and should never meet any construction material such as wet cement as this can damage the finish.
There are many benefits to these grate tops! Including:
Here at Lauxes Grates we are always working on new products! We have some new concepts in the making but are waiting to see how these go before introducing more. So… if you like what we’re doing, keep buying and giving us feedback and we’ll bring out more. The more feedback the better!
Want to check out the rest of the Lauxes Grates range? View our product catalogue now!